carry handle
The carry handle fits on the frame. You can easily pick up and turn around the carrycot or seat
using the carry handle.
step 8 fitting the carry handle to the frame
a. There is a white button at each end of the carry handle
b Press and hold in the white button on one side.
c. Place one end of the carry handle above one of the
holes in the centre of the frame.
d Push it into the hole. You will hear a ‘click’.
e. Repeat this for the other side. The carry handle is
securely fastened.
Advice Remove the carry handle by pressing the white
button in on one side and pulling out the carry
handle. Repeat this for the other side.
practicing
Now you have assembled the chassis you can:
• fold out the chassis;
• release, move and adjust the height of the handlebar;
• fit and remove the swivel wheels;
• activate and de-activate the swiveling action of the swivel wheels;
• adjust the suspension of the swivel wheels;
• fit and remove the big wheels;
• inflate the tyres to the right pressure;
• use the parking brake;
• fit, remove and turn around the frame;
• place the seat in different positions;
• fit and remove the carry handle.