other functions
removing the swivel wheels from the holders
a. The swivel wheel has a round button, which protrudes through the holder.
The button has 2 sprung lips.
b Push on the 2 lips and remove the swivel wheel from
the holder.
c. Do the same on the other side.
swivel wheels active
a. Push down the swivel locks.
b. The swivel wheels are active.
c. The manoeuvrability is highest with this setting.
swivel wheels non-active
a. Push up the swivel locks.
b. The swivel wheels are non-active.
c. The Bugaboo Gecko now moves in a straight line.
large wheels
The 2 large wheels now have tyres filled with polyurethane foam. These provide enduring suspen-
sion on both sides without the risk of a puncture. This will therefore guarantee the driving comfort
for you and your child.
step 3 fitting the large wheels to the axle
a Push the large wheels into the wheel holders at the
ends of the long axle.
b. You will hear a ‘click’ for each wheel. The wheels are
now attached.
other functions
removing the large wheels from the axle
a Squeeze together the clamp tabs on the shaft at the
inside of the large wheel.
To Next Page
Loading...
Need help?
General
