1. basic steps
This section explains how to assemble the Bugaboo Gecko. Each basic step in
the Bugaboo Gecko’s assembly is explained separately in the text boxes. It is
advisable to practice the basic steps.
chassis
The parts are attached to the chassis. The chassis comprises:
- axle for the large wheels;
- axle for the swivel wheels with holders;
- handlebar with frame bearers, parking brake and wrist strap.
You also need the following for the assembly:
- 2 swivel wheels;
- 2 large wheels
Frame completes the chassis for further assembly.
Advice Use the cardboard packaging as a mat during assembly.
step 1 folding out chassis and handlebar
a Place the chassis with the 4 points on the floor.
b. Stand with the handlebar in front of you.
c. Hold the handlebar lightly in your hands. Do not push.
d Pull the 2 white buttons on the inside of the handlebar
towards you.
To Next Page
Loading...
