g Attach the ends of the stretch belt underneath the seat.
You should hear a ‘click’. Stretch the belt until it is tight.
h Now give shape to the seat by folding the seat
pad inwards.
i Now pull the waist belts through the cut-aways in the
side of the seat fabric.
j Attach the 2 touch fasteners at the foot end to the
underneath of the frame.
Note Assemble the seat before fitting it onto the chassis.
The seat cannot be placed on the frame before
assembly.
Note Ensure that the seat fasteners, touch fasteners and
tensioning belt are fastened properly.
To Next Page
Loading...
Need help?
General
