Bugera 1990 - Audio Connection Setups; External Effects Unit Integration; Recording and PA System Integration; Understanding Mono Jack Connectors

9 BUGERA 1990 User Manual
bugera-amps.com
The following gure shows a setup with an external eects unit connected via
the FX LOOP. What’s more, the RECORDING output is connected to a mixer’s line
channel to feed the signal to a recording device. The speaker signal of the
connected loudspeaker is picked up by a microphone and is fed to the mixer via a
mic input. This way you get a second guitar signal that is amplied over a
PAsystem or can be recorded additionally or both.
Set-up for live playing
Audio connections
The inputs and outputs of the BUGERA amplier use mono jack connectors.
¼" mono jack connector
PA loudspeaker
Power amplier
Main Out
Multitrack recorder
Eects processor
Instrument input
Microphone
Electric guitar
Recording out
Mixing console
Send Return
strain relief clamp
sleeve
tip
sleeve
(ground/shield)
Unbalanced ¼" TS connector
tip
(signal)