Need help?Do you have a question about the Bugera 6260 and is the answer not in the manual?
Preamp Section| Preamp high-gain input impedance | 470 kΩ |
|---|---|
| Clean channel nominal input level | -34 dBV |
| Lead channel nominal input level | -80 dBV |
Power Amplifier Section| Valves type | 4 x 6L6GC |
|---|---|
| Output power peak power | 120 W / 16, 8, 4 Ω |
| Load impedance | 4 Ω / 8 Ω / 16 Ω switchable |
Power Supply| Power consumption max | 350 W |
|---|---|
| Fuse | T 3.15 A H 250 V (100 – 120 V~, 50/60 Hz) |
| Mains connection | Standard IEC receptacle |
Dimensions/Weight| Dimensions | Approx. 249 mm x 687.3 mm x 246 mm |
|---|---|
| Weight | Approx. 21.5 kg |
| Dimensions (H x W x D) | Approx. 9 25/32" x 27" x 9 11/16" |
Alerts regarding high voltage risks and avoiding opening the unit.
Warning against exposing the unit to rain, moisture, or liquids.
Explanation of symbols indicating dangerous voltage and important literature.
Essential advice on loudspeaker connection and amplifier switching procedures.
Emphasizes avoiding operation without a connected loudspeaker to prevent damage.
Guidance on initial setup, packaging, and registering your product online.
Advises caution with volume levels to prevent hearing and speaker damage.
Detailed description of all controls and inputs on the front panel.
Explanation of all outputs, inputs, and connectors on the rear panel.
Details on the function of each switch on the supplied footswitch.
Guidelines for accessing internal components and valve replacement.
Instructions on connecting speaker cabinets and setting impedance.
Illustrates a typical live setup using the amplifier with external effects and mixer.
Details on statutory rights, online registration benefits, and warranty terms.
Procedures for warranty service, return authorization, and claim limitations.
To Next Page
