Need help?Do you have a question about the Bugera 6262-212 and is the answer not in the manual?
Preamp Section| valves type | 2 x 12AX7A 4 x 12AX7 |
|---|---|
| preamp high-gain input impedance | 470 kΩ |
| clean channel nominal input level | -34 dBV |
| clean channel min. input level | -50 dBV |
| clean channel max. input level | 0 dBV |
| lead channel nominal input level | -80 dBV |
| lead channel min. input level | -92 dBV |
| effects send impedance | 47 kΩ or higher |
| effects send nominal output level | -10 dBV |
| effects return impedance | 470 kΩ |
| effects return min. input sensitivity | -10 dBV |
| preamp output impedance | 47 kΩ or higher |
| preamp output nominal output level | +10 dBV |
Power Amplifier Section| valves type | 4 x 6L6GC |
|---|---|
| output power peak power | 120 W / 16, 8, 4 Ω |
| loudspeaker connectors type | ¼" mono jack connectors, unbalanced |
| load impedance | 4 Ω / 8 Ω / 16 Ω switchable |
| internal loudspeakers type | 2 x 12" BUGERA, 12G70J8 |
| internal loudspeakers impedance | 8 Ω |
| internal loudspeakers power | 70 W (IEC) |
| total impedance | 16 Ω (series connection) |
Power Supply| power consumption | Max. 350 W |
|---|---|
| fuse | T 3.15 A H 250 V (100 – 120 V~, 50/60 Hz), T 1.6 A H 250 V (220 – 240 V~, 50/60 Hz) |
| mains connection | Standard IEC receptacle |
Dimensions/Weight| dimensions (H x W x D) | Approx. 20 13/32" x 27" x 9 3/4" (518.46 mm x 687.3 mm x 247.65 mm) |
|---|---|
| weight | Approx. 63 lbs (28.5 kg) |
Details risks of electric shock from internal high voltages and uninsulated parts.
Guidelines for safe operation, including environmental factors and grounding.
Advice on power cord safety, accessory use, and servicing procedures.
Critical advice on connecting the correct loudspeaker and using appropriate cables.
Step-by-step instructions for powering the amp and a warning against operating without a speaker.
Initial steps after unpacking, damage inspection, and product registration guidance.
Advice on protecting hearing and loudspeakers by setting appropriate volume levels.
Detailed explanation of each knob, switch, and input on the front panel.
Explanation of rear panel connectors like speaker outputs, FX loop, and power input.
Description of the footswitch controls for channel switching and effects.
Location and purpose of preamp and power amp valve sockets.
Steps for BIAS testing, adjustment, and recommended valve replacement practices.
Guidance on connecting speaker cabinets and setting the impedance switch correctly.
Setup for integrating external effects and routing signals to a mixer for live sound and recording.
Technical data for the preamp stage, power amp, valves, and output.
Details on power consumption, fuse ratings, mains connection, and unit dimensions/weight.
Buyer's statutory rights, national law applicability, and importance of online product registration.
Details on warranty period for components and valves, and conditions that void the warranty.
Procedure for obtaining warranty service, including return authorization and required documentation.
To Next Page
