Need help?Do you have a question about the Bugera 6262-212 and is the answer not in the manual?
Preamp Section| valves type | 2 x 12AX7A 4 x 12AX7 |
|---|---|
| preamp high-gain input impedance | 470 kΩ |
| clean channel nominal input level | -34 dBV |
| clean channel min. input level | -50 dBV |
| clean channel max. input level | 0 dBV |
| lead channel nominal input level | -80 dBV |
| lead channel min. input level | -92 dBV |
| effects send impedance | 47 kΩ or higher |
| effects send nominal output level | -10 dBV |
| effects return impedance | 470 kΩ |
| effects return min. input sensitivity | -10 dBV |
| preamp output impedance | 47 kΩ or higher |
| preamp output nominal output level | +10 dBV |
Power Amplifier Section| valves type | 4 x 6L6GC |
|---|---|
| output power peak power | 120 W / 16, 8, 4 Ω |
| loudspeaker connectors type | ¼" mono jack connectors, unbalanced |
| load impedance | 4 Ω / 8 Ω / 16 Ω switchable |
| internal loudspeakers type | 2 x 12" BUGERA, 12G70J8 |
| internal loudspeakers impedance | 8 Ω |
| internal loudspeakers power | 70 W (IEC) |
| total impedance | 16 Ω (series connection) |
Power Supply| power consumption | Max. 350 W |
|---|---|
| fuse | T 3.15 A H 250 V (100 – 120 V~, 50/60 Hz), T 1.6 A H 250 V (220 – 240 V~, 50/60 Hz) |
| mains connection | Standard IEC receptacle |
Dimensions/Weight| dimensions (H x W x D) | Approx. 20 13/32" x 27" x 9 3/4" (518.46 mm x 687.3 mm x 247.65 mm) |
|---|---|
| weight | Approx. 63 lbs (28.5 kg) |
To Next Page
