Need help?Do you have a question about the Bugera VEYRON BV1001M and is the answer not in the manual?
General| Type | Bass Amplifier Head |
|---|---|
| Power Output | 1000W |
| Total Power | 1000W |
| Number of Channels | 1 |
| Effects Loop | Yes |
| Input Impedance | 1 MΩ |
| Signal-to-Noise Ratio | > 100 dB |
| THD | < 0.1% |
| Damping Factor | > 200 |
| Inputs | 1 x 1/4" |
| Tube Type | 1 x 12AX7 |
| Impedance | 4 Ohms Minimum |
| EQ | 4-band EQ with dedicated Low and High Mids |
| Outputs | 1 x speakON, 1 x Line Out (XLR) |
| Footswitch I/O | Yes (Channel Select) |
Covers critical electrical safety, operational precautions, and proper usage for the amplifier.
Outlines legal liability limitations and details for product warranty coverage.
Addresses critical factors for optimal performance, including impedance, cable types, and potential interference.
Step-by-step guide for physically connecting the amplifier to speakers and other audio sources.
Detailed explanation of each button, knob, and jack on the amplifier's front panel.
Guides for product registration, handling malfunctions, and proper power connection procedures.
To Next Page
