To Next PageTo Next Page
Need help?Do you have a question about the Bugera BVP5500 and is the answer not in the manual?
General| Power Output | 550W |
|---|---|
| Type | Bass Amplifier |
| Number of Channels | 2 |
| Total Power | 550W |
| Effects Loop | Yes |
| Tube | Yes |
| Cooling | Fan |
| Tube Type | Tube |
| Weight | 37.5 lbs |
| Dimensions | 4.7 x 19 x 12.4" |
| Inputs | 1 x 1/4" input |
| Outputs | 1 x 1/4" |
| Frequency Response | 10 Hz - 20 kHz |
| Input Impedance | 1 MΩ |
| EQ | 9-band |
Essential safety guidelines for using the amplifier, covering electrical hazards and proper handling.
Covers one-year warranty, exclusions for misuse, wear, transferability, and damage claims.
Adjust GAIN CONTROL, MASTER VOLUME, and VALVE GAIN for desired tone and compression.
Shape tone using PRIMARY TONE CONTROLS and 9-BAND GRAPHIC EQ.
Set initial controls, connect instrument via INPUT JACK with a 1/4" TS cable.
Adjust GAIN CONTROL for CLIP LED indication, then set MASTER OUTPUT VOLUME.
