L
An
mow
on
the instrument
panel will flash
in
the
direction of the
turn
or
lane change.
To signal a lane change, just raise or lower the lever
until the arrow starts to flash. Hold it there until you
complete your lane change. The lever will return by
itself when you release it.
As
you signal a turn or a lane change,
if
the arrows don’t
flash but just stay on, a signal bulb may be burned out
and other drivers won’t see your turn signal.
If
a bulb is burned out, replace it to help avoid an
accident.
If
the arrows don’t
go
on at all when you
signal a turn, check the fuse and check for burned-out
bulbs. See “Fuses and Circuit Breakers”
in
the Index.
Turn Signal Reminder
If your
turn
signal is left on for more than
3/4
of a mile,
a chime will sound.
To
turn
off
the chime, move the
turn
signal lever
to
the
off
position.
To Next Page