Getting to Know Your Lucerne
8
Heated and Cooled Seats
(if equipped)
The heated and cooled seat buttons are
located on the front doors.
(Cooled Seat): Press this button to
turn on the cooled seat.
(Heated Seatback): Press this but-
ton to turn on the heated seatback.
(Heated Seat and Seatback):
Press this button to turn on the heated
seat and seatback.
There are three temperature settings
(high, medium and low) for each feature.
Continue to press the button to
decrease the temperature setting. To
turn off the feature, press the button until
the indicator light is off.
The heated seat warm-up time may take
slightly longer if the seats are also
equipped with the cooling feature.
See Section 1 of your Owner Manual.
Dual-Zone Climate Controls
(if equipped)
The climate control system automatically
maintains the desired temperature indi-
vidually for the driver and front seat pas-
senger. If your vehicle is equipped with
memory settings, a memory feature for
up to two drivers also is included.
Automatic Operation
1. Turn the fan control (A) to the AUTO
position.
2. Turn the airflow mode control (B) to
the AUTO position.
3. Adjust the temperature to a comfort-
able setting using the temperature
control buttons.
The system will automatically adjust the
airflow mode, fan speed, air conditioning
and recirculation functions to reach the
set temperature as quickly as possible.
Manual Operation
(Fan): Turn the fan control to
increase or decrease fan speed.
(Off): Turn the fan control to the Off
position to turn off the climate control
system.
(Air Conditioning): Press the fan
control to turn the air conditioning sys-
tem on or off.
(Driver’s Temperature Control): To
increase or decrease the driver’s tem-
perature setting, press the arrow buttons
next to the fan control.
A
B
Lucerne06Beta6.qxd 9/8/05 9:04 PM Page 8
To Next Page
Loading...
Need help?
General
