AUTO UNLOCK ON
This feature displays only if DRIVER or ALL was
selected for the AUTO DOOR UNLOCK feature.
This feature allows the selection of when the vehicle’s
doors will unlock.
Press the option button until AUTO UNLOCK ON
appears on the DIC display. Press the set/reset
button to scroll through the following settings:
KEY-OUT: The door(s) will unlock when the key is
taken out of the ignition.
PARK (default): The door(s) will unlock when the
vehicle is shifted into PARK (P).
To select a setting and move on to the next feature,
press the option button while the desired setting
is displayed on the DIC.
FOB UNLOCK ON 1ST PRESS
This feature allows the selection of which doors
will unlock on the first press of the unlock button
on the Remote Keyless Entry (RKE) transmitter.
See Remote Keyless Entry (RKE) System Operation
on page 2-5 for more information.
Press the option button until FOB UNLOCK ON
1ST PRESS appears on the DIC display. Press the
set/reset button to scroll through the following settings:
DRIVER (default): The driver’s door will unlock
on the first press of the unlock button on the RKE
transmitter.
ALL: All of the doors will unlock on the first press of
the unlock button on the RKE transmitter.
To select a setting, press the option button while the
desired setting is displayed on the DIC. The DIC
will then display PRESS UNLOCK SWITCH ON KEY
FOB. Press the unlock button on the RKE transmitter
and the setting will be saved for that RKE transmitter.
After programming the last option, the message
PERSONAL OPTIONS SAVED appears on the DIC
display for a few seconds, then the display returns
to the PERSONAL PROGRAM main screen.
Exiting the Personal Program Menu
The personal program menu will be exited when
any of the following occurs:
• The vehicle is shifted out of PARK (P).
• The vehicle is no longer in ON/RUN.
• The end of the personal program menu is reached.
3-79
To Next Page
Loading...
