4. Fill the radiator with the proper DEX-COOL
®
coolant
mixture, up to the base of the filler neck. See Engine
Coolant on page 5-27 for more information about the
proper coolant mixture.
If you see a stream of coolant coming from the air
bleed valve, close the valve. Otherwise, close
the valve after the radiator is filled.
5. Rinse or wipe any spilled coolant from the engine
and the compartment.
6. Then fill the coolant recovery tank to the COLD
FILL line.
7. Put the cap back on the coolant recovery tank, but
leave the radiator pressure cap off.
8. Start the engine and let it run until you can feel the
upper radiator hose getting hot. Watch out for the
engine cooling fans.
5-39
To Next Page
Loading...
Need help?
General
