EasyManuals Logo

Buick 2008 Allure User Manual

Buick 2008 Allure
426 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #301 background imageLoading...
Page #301 background image
{CAUTION:
You can be burned if you spill coolant on hot
engine parts. Coolant contains ethylene glycol
and it will burn if the engine parts are hot
enough. Do not spill coolant on a hot engine.
3. Fill the cooling system with the proper DEX-COOL
®
coolant mixture, up to the base of the filler neck.
See Engine Coolant on page 5-27 Engine Coolant
for more information about the proper coolant
mixture.
4. Rinse or wipe any spilled coolant from the engine
and the compartment.
5. Then fill the coolant recovery tank to the COLD
FILL line.
6. Install the coolant recovery tank cap and the
pressure cap. After a day or two of driving, when the
engine is cold, check the coolant level in the recovery
tank. If it is low, refill it to the COLD FILL line.
If the coolant in the recovery tank is constantly low,
you should have a dealer/retailer service department
inspect the vehicle for leaks.
5-41

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Buick 2008 Allure and is the answer not in the manual?

Buick 2008 Allure Specifications

General IconGeneral
BrandBuick
Model2008 Allure
CategoryAutomobile
LanguageEnglish

Related product manuals