Memory Features
On vehicles with the memory feature, the controls on
the driver door are used to program and recall memory
settings for the driver seat, outside mirrors, and the
power steering column, if the vehicle has this feature.
1: Saves and recalls for driver 1.
2: Saves and recalls for driver 2.
S : Recalls the easy exit driver seat and power steering
column positions.
Storing Memory Positions
To save into memory:
1. Adjust the driver seat, seatback recliner, lumbar,
both outside mirrors, and the power steering
column, if equipped.
2. Press and hold “1” until two beeps sound.
3. Repeat for a second driver position using “2.”
To recall the memory positions, press and release “1”
or “2.” The vehicle must be in P (Park). A single beep
will sound. The seat, outside mirrors, and power
steering column, if equipped, will move to the positions
previously stored for the identified driver.
See Memory Seat and Mirrors
on page 2‑7
for more
information.
Easy Exit Positions
The easy exit feature can move the driver seat rearward
and the power steering column, if equipped, up and
forward to allow extra room to exit the vehicle.
S : Press to recall the easy exit positions. The vehicle
must be in P (Park).
See Memory Seat and Mirrors
on page 2‑7
and “Easy
Exit Recall” and “Easy Exit Setup” under DIC Vehicle
Customization
on page 4‑56
for more information.
1-8
To Next Page
Loading...
Need help?
General
