Infotainment System 7-25
To start a conference while in a
current call:
1. Turn or press the TUNE/
MENU knob.
2. Select Enter Number or press
the TUNE/MENU knob to select
Enter Number.
3. For the radio with CD only, enter
the character sequence then
select Call. See “Entering a
Character Sequence” in
Operation on page 7-5. For the
radio with CD and touch screen,
enter the number.
4. After the call has been placed,
turn or press TUNE/MENU and
choose Merge Calls.
5. To add more callers to the
conference call, repeat Steps 1–
4. The number of callers that
can be added is limited by your
wireless service carrier.
Ending a Call
Turn or press the TUNE/MENU
knob and select Hang Up.
Muting a Call
To Mute a Call
Turn or press the TUNE/MENU
knob and select Mute Call.
To Cancel Mute
Turn or press the TUNE/MENU
knob and select Mute Call.
Dual Tone Multi-Frequency
(DTMF) Tones
The in-vehicle Bluetooth system can
send numbers during a call. This is
used when calling a menu-driven
phone system.
For the radio with CD:
1. Turn or press the TUNE/MENU
knob and select Enter Number.
2. Enter the character sequence.
See “Entering a Character
Sequence” in Operation on
page 7-5.
For the radio with CD and Touch
Screen:
1. Touch Enter Number.
2. Use the keypad to enter the
number.
Bluetooth (Voice
Recognition)
Using Voice Recognition
For radios with CD and touch
screen, see “Bluetooth” in the
infotainment manual.
To use voice recognition, press the
b / g button located on the steering
wheel. Use the commands below for
the various voice features. For
additional information say "Help"
while you are in a voice
recognition menu.
Pairing
A Bluetooth-enabled cell phone
must be paired to the Bluetooth
system and then connected to the
vehicle before it can be used. See
your cell phone manufacturer's user
guide for Bluetooth functions before
pairing the cell phone. If a Bluetooth
phone is not connected, calls will be
To Next Page
Loading...
Need help?
General
