Instruments and Controls 123
Information Displays
Power Flows
(eAssist Only)
To view the Power Flow screens in
the center stack display, press the
[ button on the Home screen or
on the Application Tray on the top of
the infotainment system touch
screen. Then press the Flow button
at the bottom of the touch screen.
These screens indicate the current
operating condition and the energy
flow between the engine, generator,
and high voltage battery.
Auto Stop – Vehicle is stationary
with battery active and no power is
flowing to the wheels.
Engine Power – Engine is active
with energy flowing to the wheels.
Engine Idle – Vehicle is stationary
with engine active and no power is
flowing to the wheels.
Regen Recovery – Power from the
wheels returns to the battery during
regenerative braking or coasting.
Hybrid Power – Both the engine and
battery are active with energy
flowing to the wheels.
To Next Page
Loading...
