Buick Cascada 2016 - Cruise Control

15
Cruise Control
Traction Control and StabiliTrak® Systems
Setting Cruise Control
1. Press the
On/Off button. The
Cruise Control symbol will illuminate in
white on the instrument cluster.
2. When traveling at the desired speed,
rotate the thumbwheel down to the
SET– position to set the speed. The
symbol will illuminate in green on the
instrument cluster.
Adjusting Cruise Control
RES+ Resume/Accelerate
Rotate the thumbwheel up to resume a set speed. When the system is active, rotate and
hold the thumbwheel up to increase speed.
SET– Set/Coast
When the system is active, rotate and hold the thumbwheel down to decrease speed.
Cancel
Press to cancel the cruise control without erasing the set speed from memory. Pressing
the brake pedal also will cancel the cruise control.
The cruise control set speed is erased when cruise control or the vehicle ignition is
turned off.
See Driving and Operating in your Owner Manual.
The traction control system limits wheel-
spin and the StabiliTrak® stability control
system assists with directional control
of the vehicle in difcult driving condi
-
tions. Both systems turn on automatically
every time the vehicle is started. Turn off
traction control if the vehicle is stuck and
rocking the vehicle is required.
Press the
Traction Control/
StabiliTrak Off button on the center of
the instrument panel to turn traction
control on or off.
See Driving and Operating in your Owner Manual.