16
Automatic Transmission
Driving Assistance Systems
Driver Shift Control
Driver Shift Control is a manual mode that
allows the driver to shift gears manually.
This feature can be used to drive the vehicle
in a sportier manner, or to downshift when
driving on a downhill grade to provide
engine braking.
1. Move the shift lever left to the +/–
position.
2. Tap the shift lever forward (+) to upshift
or rearward (–) to downshift. The current
gear will be displayed on the Driver Information Center.
If vehicle speed is too high or too low for the requested gear, the shift will not occur.
When coming to a stop, the transmission will downshift automatically.
See Driving and Operating in your Owner Manual.
Forward Collision Alert
F
The
Vehicle Ahead indicator illuminates
in green on the instrument cluster when a
vehicle is detected and illuminates in amber
when following a vehicle ahead too closely.
If your vehicle approaches another vehicle
too rapidly, a visual alert ashes on the
Driver Information Center and rapid beeps
sound.
Press the
Collision Alert button (A)
on the steering wheel to set the alert
timing to Far, Medium, Near or Off. The
setting is displayed on the Driver
Information Center.
Lane Departure Warning
F
When crossing a detected lane marking
without using a turn signal in that direction,
the
Lane Departure Warning indicator
ashes on the instrument panel and beeps
sound.
To turn the system on or off, press the
Lane Departure Warning button (B) on the center of the instrument panel.
Note: The camera sensor is located ahead of the rearview mirror. Keep the windshield clean for proper
operation.
See Driving and Operating in your Owner Manual.
F
Optional equipment
A
B
To Next Page
Loading...
Need help?
General
