Vehicle Care 307
Button Retainer
Some vehicles have floor mats with
a button-type retainer.
Removing and Replacing the
Floor Mat
1. Pull up on the rear of the mat
to unlock and remove.
2. Reinstall the floor mat by lining
up the floor mat opening over
the carpet retainer and
snapping into position.
3. Make sure the floor mat is
properly secured. Verify the
floor mat does not interfere
with the pedals.
Knob Retainer
Some vehicles have floor mats with
a knob retainer.
Removing and Replacing the
Floor Mat
1. Turn the knob until it is aligned
with the slot in the floor mat
grommet.
2. Pull up on the floor mat.
3. Center the slot in the floor mat
grommet with the knob on the
floor and set into position.
4. Turn the knob until it is
perpendicular to the slot in the
grommet to lock the mat in
place.
5. Make sure the floor mat is
properly secured. Verify the
floor mat does not interfere
with the pedals.
To Next Page
Loading...
Need help?
General
