Buick Encore GX Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-
16263917) - 2023 - CRC - 2/24/22
276 Vehicle Care
2. Remove the bulb from the bulb socket
and replace with a new bulb.
3. Insert the bulb socket and attach the
plug connector.
4. Reassemble the cover.
Stop lamp/Taillamp, Turn Signal, and
Sidemarker Lamp
Driver Side Shown, Passenger Side Similar
1. Stop lamp/Taillamp
2. Turn signal lamp
1. Remove and retain both screws attaching
the taillamp assembly to the
vehicle body.
2. Pull the taillamp assembly straight back
to detach it from the vehicle body. Take
care that the cable duct remains in place.
3. Remove the bulb socket from the
taillamp assembly.
To Next Page
Loading...
