Buick ENVISION 2018 - Rear Seats; Power Liftgate

7
Rear Seat Adjustment
To slide the seat forward or rearward, li
the bar (A) under the seat cushion and
slide the seat.
Reclining the Seatback
To recline the seaback, pull the lever (B)
onthe side of the seat cushion and move
the seatback to the desired position.
Release the lever.
Folding the Seatback
1. Press the button on the side of the head
restraint. It will fold automatically.
2. Pull the lever (B) on the side of the seat
cushion and fold the seatback forward or
pull the release lever located on the side of
the cargo area.
To raise the seatback, pull the lever on the
side of the seat cushion and push the seatback rearward until it locks in the upright
position. Adjust the seatback.
See Seats and Restraints in your Owner’s Manual.
REAR SEATS
POWER LIFTGATE
Open/Close the Power Ligate
Press the Power Ligate button on the Remote Keyless Entry transmitter twice.
Press the Power Ligate knob on the driver’s door.
Press the touchpad on the ligate handle to open the ligate.
Press the button next to the ligate pull to close the ligate.
Hands-Free Operation
To open or close the ligate hands-free, kick
your foot under the rear bumper in the area
directly below the le edge of the license plate.
To function, the Remote Keyless Entry transmitter
must be within 3 feet of the ligate.
Programming the Ligate Height
1. Turn the Power Ligate knob to the 3/4 position.
2. Open the ligate.
3. Adjust the ligate manually to the desired height.
4. To save the setting, press and hold the button next to the ligate pull for 3 seconds. The
turn signals will ash when the setting is saved.
See Keys, Doors and Windows in your Owner’s Manual.
A
B