Buick ENVISION 2019 - Power Liftgate; Opening, Closing, and Hands-Free Operation; Programming Liftgate Height; Driver Information Center

8
DRIVER INFORMATION CENTER
The Driver Information Center (DIC) on the
instrument cluster displays a variety of vehicle
system information and warning messages.
DIC Controls
Use the controls on the right side of the steer-
ing wheel to view and move through the Info
(trip and fuel information), Audio, Phone,
Navigation
F
, and Options menus.
Press the or button to move
between the display zones.
Press the or button to scroll
through the menus.
Press the button to open a menu or to
select or reset a setting.
Select Info Pages
1. Use the controls to display Options and
then press the button.
2. Scroll to Info Pages. Press the button to enter the menu.
3. Scroll through the list of items.
4. Press the button to select or deselect an item to display in the Info menu.
F Optional equipment
Base DIC display shown
See Instruments and Controls in your Owner’s Manual.
POWER LIFTGATE
Open/Close the Power Ligate
Press the Power Ligate button on the Remote Keyless Entry transmitter twice.
Press the Power Ligate knob on the inside of the driver’s door.
Press the touchpad on the ligate handle to open the ligate.
Press the button next to the ligate pull to close the ligate.
To open or close the ligate hands-free, kick
your foot under the rear bumper in the area
directly below the le edge of the license plate.
To function, the Remote Keyless Entry transmitter
must be within 3 feet of the ligate.
Programming the Ligate Height
1. Turn the Power Ligate knob to the 3/4 position.
2. Open the ligate.
3. Adjust the ligate manually to the desired height.
4. To save the setting, press and hold the button next to the ligate pull for 3 seconds. The
turn signals ash and a beep sounds when the setting is saved.
See Keys, Doors and Windows in your Owner’s Manual.