• Trip A and Trip B
• Fuel Range (until
empty)
• Average Fuel
Economy
• Instantaneous
Fuel Economy
• Average Speed
(Trip/Fuel): Press this button to
scroll through the following trip and fuel
information:
(Set/Reset): Press this button to reset
DIC information while it is displayed or to
acknowledge a warning message.
Getting to Know Your Lucerne
4
Your vehicle’s Driver Information Center
(DIC) provides vehicle feature customization,
vehicle information, and vehicle warning
messages. The DIC messages will be shown
on your instrument panel cluster display. The
DIC buttons are located on the instrument
panel to the left of the steering wheel. To
operate the DIC, the ignition switch must be
in the Run position.
See Section 3 of your Owner Manual.
(Vehicle Information): Press this
button to scroll through the following vehicle
information:
• Oil Life Remaining
• Units (English/Metric)
• Parking Assist
• Reset Tire Pressure System
• Compass Zone
• Compass Calibration
• Relearn Remote Key
(Customization): Press this button to
scroll through the customization settings.
To program customization settings:
1. Place the vehicle in Park (P).
2. Press the (Customization) button to
enter the Feature Settings menu and
scroll through the available features.
3. Press the (Set/Reset) button to
access the settings for the feature being
displayed.
4. Press the button to scroll through the
available settings.
5. Press the button to choose the
setting being displayed and move to the
next feature.
Driver Information Center
To Next Page
Loading...
