• Odometer
• Trip A and Trip B
• Fuel Range (until
empty)
• Average Fuel
Economy
• Instantaneous
Fuel Economy
• Average Speed
(Trip/Fuel): Press this button to
scroll through the following trip and
fuel information:
Getting to Know Your Lucerne
4
Your vehicle’s Driver Information
Center (DIC) provides vehicle feature
customization, vehicle information,
and vehicle warning messages.The
DIC messages will be shown on your
instrument panel cluster display. The
DIC buttons are located on the
instrument panel to the left of the
instrument cluster. To operate the
DIC, the ignition switch must be in
the Run position.
(Vehicle Information): Press
this button to scroll through the
following vehicle information:
• Oil Life Remaining
• Units (English/Metric)
• Parking Assist
• Side Blind Zone
• Tire Pressure
• Compass Zone
• Compass Calibration
• Relearn Remote Key
(Customization): Press this
button to scroll through the
customization settings.
To program customization settings:
1. Place the vehicle in Park (P).
2. Press the (Customization)
button to enter the Feature
Settings menu and scroll through
the available features.
3. Press the (Set/Reset) button to
access the settings for the feature
being displayed.
4. Press the button to scroll
through the available settings.
5. Press the button to choose the
setting being displayed and move
to the next feature.
Driver Information Center
(Set/Reset): Press this button to
reset DIC information while it is
displayed or to acknowledge a
warning message.
See Section 3 of your Owner Manual.
To Next Page
Loading...
