Buick lucerne 2009 - Front Seats

(Cooled Seat): Press
this button to turn the
cooled seat on or off.
Getting to Know Your Lucerne
8
(Heated Seat and
Seatback): Press this
button to turn the
heated seat and
seatback on or off.
The memory buttons and heated and cooled seat buttons are located on the
driver’s door.
See Section 1 of your Owner Manual.
Memory Settings and Heated and Cooled Seats
(if equipped)
Memory Recall: Press button 1 or
2 to recall the memory settings
programmed for the driver’s seat,
the outside mirrors and the
power tilt wheel and telescoping
steering column (if equipped). The
memory seat setting also can be
programmed to be recalled auto-
matically using the DIC.
To save memory settings:
1. Adjust the driver’s seat, outside
mirrors and steering wheel to a
comfortable position.
2. Press and hold button 1 until
two beeps sound.
3. Repeat these steps using button
2 for a second driver.
See Section 1 of your Owner Manual.
Easy Exit Seat: With the vehicle in
Park (P), press this button to recall
the exit position for the driver’s seat
and power tilt/telescoping steering
wheel (if equipped). The easy exit
seat setting also can be programmed
to be recalled automatically using
the DIC.
Seat Temperature Settings: There are three heated and cooled seat temperature
settings (high, medium and low). Continue to press the button to decrease
the temperature setting.
(Heated Seatback):
Press this button to
turn the heated
seatback on or off.