The exterior lamps knob is located on
the instrument panel, to the left of the
steering wheel.
Turn off the Daytime Running Lamps
(DRL) and automatic headlamp
system
• Move the knob to the OFF ( )
position.
The automatic headlamp system auto-
matically reactivates at the next key-on.
Activate the Daytime Running Lamps
(DRL) and automatic headlamp system
• Move the knob to the AUTO ( )
position.
• All exterior lamps and the instrument
panel/radio lights will illuminate when
they are needed.
Manually activate the parking lamps,
side-marker lamps, taillamps, instru-
ment panel/radio lights and license
plate lamps
• Move the knob to the parking lamp
() position.
Manually activate the headlamps, all
exterior tail/marker lamps and the
instrument panel/radio lights
• Move the knob to the ON ( )
position.
7
Headlamp Controls
Mode 3: All doors unlock when the key
is removed from the ignition
Mode 4: No automatic door unlock
There are two methods for personalizing
your vehicle locking/unlocking prefer-
ences. One method is to press the per-
sonalization button ( ) on the Driver
Information Center until AUTOMATIC
LOCKING (or AUTOMATIC UNLOCK-
ING) appears on the display. Press the
Select button ( ) until the desired set-
ting appears on the display and press
the personalization button to select it.
For an alternate method of setting lock-
ing/unlocking preferences, see the
Programable Locking Feature section of
your Owner Manual.
See Section 2 of your Owner Manual.
Remote Lock/Unlock Feedback
Program the Remote Keyless Entry
System’s lock/unlock feedback (horn,
parking lamps, both or neither) by press-
ing the personalization button ( ) on
the Driver Information Center until
REMOTE LOCK FEEDBACK (or unlock,
as desired) appears on the display.
Press the Select button ( ) to scroll
through the menu of choices. To pro-
gram the lock/unlock feedback feature,
press the personalization button when
the desired menu option is displayed.
See Section 3 of your Owner Manual.
Rainier2004r7a 7/23/03 3:36 PM Page 7