[ (Forward): Press and hold this key to quickly
advance within a track. As the CD advances, elapsed
time will be displayed to help you find the correct
passage. Release this key to play the passage.
r (Reverse): Press and hold this key to quickly
reverse within a track. As the CD reverses, elapsed time
will be displayed to help you find the correct passage.
Release this key to play the passage.
w SEEK x: Within two seconds, press and release
the SEEK up arrow to advance to the next track, or
the down arrow to return to the previous track.
Track Scan: Press and hold one of the SEEK arrows
for two seconds or more to enter CD TRACK SCAN
mode. A chime will sound to alert you that TRACK
SCAN is active, and the first 10 seconds of each track
on the disc will be played before advancing to the
next track. Press one of the SEEK arrows again to stop
the scan at the track currently being played.
BAND: Press the BAND key to switch to the radio
when a CD is playing.
Compact Disc Messages
CD ERROR: If this message appears on the screen,
the CD is not being read by the system. The CD could
be dirty, scratched, wet, or upside down. You may
also be driving on a very rough road. When the road
becomes smoother, the CD should play.
NO MUSIC DISC: If this message appears on the
screen, the map DVD is still inserted in the system.
Press eject and return the map DVD to its case, then
insert a CD. The CD should play.
NO DISC: If this message appears on the screen, the
CD slot is empty. Insert a CD. The CD should play.
If a CD is not playing correctly for any other reason, try
a known good CD. If any error occurs repeatedly or
if an error cannot be corrected, contact your dealer.
If your radio displays an error message, write it down
and provide it to your dealer when reporting the problem.
See “Rear Seat Audio (RSA)”, “Care of Your CDs and
DVDs”, and “Care of Your CD and DVD Player” in
your vehicle’s owner’s manual for more information.
3-13
To Next Page
Loading...
Need help?
General
