To Next PageTo Next PageHow to troubleshoot a Bull 17400 that does not operate?
If your Bull Refrigerator isn't operating, first ensure it's properly connected to a power supply. Then, check if the appliance is turned on. Lastly, inspect the power supply for a tripped circuit breaker or blown fuse; switch on the circuit breaker or replace the fuse as needed.
What to do if the alarm sounds and the temperature display flashes on my Bull 17400 Refrigerator?
If the alarm sounds and the temperature display flashes on your Bull Refrigerator, it could be due to several reasons. First, check if the door has been open for more than 60 seconds and close it if it has. It could also mean that the temperature has risen higher or lower than the set temperature; in this case, allow the appliance to work until the set temperature is reached. Ensure that you are not opening the door too often and that the ventilation opening is clear and not dusty.
Why is my Bull Refrigerator not cold enough?
If your Bull Refrigerator isn't cold enough, start by checking if the temperature is set correctly. The ambient temperature may require a lower temperature setting, so try setting a lower temperature. Avoid opening the drawer too often and ensure it is closed completely. Also, check the door seal for proper sealing; clean or replace it if necessary. Lastly, make sure the condenser is clean and the ventilation opening is not blocked or dusty.
Why does my Bull 17400 turn itself on and off frequently?
Your Bull Refrigerator might be turning on and off frequently due to: a higher than average room temperature, adding a large amount of food, opening a drawer too often, not closing the drawer completely, or a faulty drawer gasket. Check the set temperature and lower it if necessary. Don't open the drawer more than needed and ensure it's fully closed. Inspect the door seal and clean or replace it. Clean the condenser and clear any obstructions from the ventilation.
General| Brand | Bull |
|---|---|
| Model | 17400 |
| Category | Refrigerator |
| Language | English |
Details on where to find the serial number on the product and its packaging.
General safety information, including the meaning of DANGER and WARNING symbols.
Essential precautions for electrical safety, grounding, and handling the appliance.
Guidance on preparing the appliance for installation and initial setup.
Detailed steps for securely installing the anti-tip bracket to prevent tipping hazards.
Crucial information regarding electrical grounding requirements and plug safety.
Guide to using the control panel and understanding operating temperature ranges.
Procedures for cleaning the exterior stainless steel and general maintenance.
