BullFrog A8 - Page 24

23
Maintenance Reminders
e R Series (R800) keypad can be set up to remind you of
several types of maintenance required on your spa, including
rinsing the lter, cleaning the lter, changing spa water, and
2-year professional maintenance checks. Each task has its own
standard duration, based on normal use, or you may adjust to t
your specic expected usage.
From the Settings page you can access the Maintenance
menu, which gives you access to the following options:
• Maintenance reminders
• Standby mode
Maintenance reminders menu allows you to verify the time left
before maintenance is required, as well as to reset the time once a
task is completed.
Use the
and buttons to choose the maintenance
reminder that you wish to view. Select it by pressing Key 2. To
reset a reminder once maintenance has been performed select
it by pressing Key 2, then conrm by pressing Key 6 when
prompted. Once you have conrmed the task reminder will be
reset.
When you select Reset reminders you will be asked to conm
your choice. Doing so will reset all maintenance reminders to
default values.
Selecting the Standby mode from the maintenance submenu
allows you to service your spa. Pumps will stop for 30 minutes,
and automatically restart after this time. Once Standby mode
has been activated a screen will appear to show that pumps are
stopped. e Home/Status page will return after the 30 minute
standby maintenance period.
Use Key 6 to Cancel the Standby function before the 30 minute
period and restart the spa.
Set Date and Time of Day
Setting the correct date and time is important for settings to
function as expected. Upon restarting your spa adjust the time
format (24 hr. or AM/PM), change the year, date, and time as
needed.
Within the Settings menu use the and buttons and
then the ( Jets 2/Key 2) button to select the Date & Time
submenu.
Use the and buttons to choose the setting that
you wish to adjust, and select it by pressing Key 2. Use the
and buttons to change the parameters, and key 2
to move between options. ( Jets 1/Key 1) will take you back
to the main Settings menu.
Adjust Keypad Settings
In this Settings submenu you can change the temperature unit,
language, display orientation, and keypad security.
Within the Settings menu use the
and buttons and
then the ( Jets 2/Key 2) button to select the Keypad Settings
submenu. Use the
and buttons to choose the setting that
you wish to adjust, and select it by pressing Key 2. Use the
and buttons to change the parameters, and key 2 to move
between options. ( Jets 1/Key 1) will take you back to the
main Settings menu.
When you change the display orientation, the contextual options
and arrow keys adjust to the chosen orientation. e Mode and
Menu keys remain unchanged, as well as the accessory keys in the
main Spa menu.
You can lock the keypad by selecting one of 3 security levels:
Unlock, Partial lock, or Full lock. e Partial level locks the set
point adjustment and many options in the settings menu. e
Full level locks all keypad functions. To unlock the keypad
(either Partial or Full), press and hold the top selection key (Key
4) for 5 seconds.
Miscellaneous
In the Miscellaneous submenu you can change the Warm
weather* and Info messages options.
You may select to bypass the spa ltration over-temperature
feature. When Warm weather is “O ”, the ltration over
temperature feature is disabled. is allows the spa to continue
ltering even through the water temperature is high.
Congure the main window message center with the Info
messages submenu. When set to “Display, all information”
messages are displayed without exception. When set to “Hide”
some detailed messages are not displayed when they occur to keep
the message center simple.
* Depending on spa conguration

IMPORTANT: Please do not make changes in this section
unless you are a qualied electrician.
In this section you can change the low-level conguration, as
well as modify the number of phases and the input current
value.* Please refer to the diagram on the spa control center box,
located inside of the equipment compartment, for the default
conguration of your specic spa model.
Use the and buttons to move to the selection you want
to modify. Use Key 2 to select, and the and buttons to
move through the selections. Press Key 2 again to conrm.
Please see the techbook for your spa system for details on low-
level settings. Once you have changed the number of phases in
the menu you will be unable to use the and buttons
to return to the Low-level conguration menu. Please go back
and access the menu again. When you change to low-Level
conguration of the pack, all Comfort Line control settings will
reset (same as Factory reset feature).