Need help?Do you have a question about the BullFrog X Series and is the answer not in the manual?
General| Lighting | LED Lighting System |
|---|---|
| Number of Jets | Varies by model and JetPak configuration |
| Heater | 4kW |
| Shell Material | Acrylic |
| Insulation | Full Foam |
| Seating Capacity | Varies by model (typically 5-8) |
| Dimensions | Varies by model (approx. 7' x 7' to 8' x 8') |
| Dry Weight | 600-1, 200 lbs |
Fields to record spa model, serial number, dealership, and purchase details.
Fields to record contact details for general, electrician, concrete, and landscaping contractors.
Lists the available Bullfrog Spas series and their corresponding models.
Covers essential safety guidelines for spa operation, child safety, and electrical hazards.
Details warnings related to water temperature, health conditions, and proper spa use.
Instructions on where to place the included spa warning signs for user visibility.
Labeled diagram identifying main controls, jets, and features of the M Series spa.
Labeled diagram identifying main controls, jets, and features of the STIL Series spa.
Labeled diagram identifying main controls, jets, and features of the A & R Series spas.
Labeled diagram identifying main controls, jets, and features of the X Series spa.
Diagrams and labels for components within the M Series spa equipment compartment.
Diagrams and labels for components within the A, R, X, STIL Series spa equipment compartments.
Step-by-step guide for filling the M Series spa with water, including hose placement.
Step-by-step guide for filling A, R, X, STIL series spas, including filter access.
Explains startup, power, and pump priming for M, A, and STIL series touch controls.
Details on navigating the spa's home screen, adjusting temperature, and accessing settings.
Describes various modes like Energy Saving, Away, and Standard for spa water management.
Instructions on how to adjust filtration and economy schedules for the spa.
How to set up and reset maintenance reminders for filter, water, and checks.
Covers setting date/time, keypad language, locking, and electrical setup details.
Explains startup, power, and pump priming for the R Series control panel.
Details on navigating the R Series home screen, adjusting temperature, and accessing settings.
Explains various water care modes and schedule modification for R Series spas.
How to manage maintenance reminders and standby mode for R Series spas.
Covers keypad settings, screen lock, electrical configuration, and audio setup for R Series.
Explains preparation, filling, power, and pump priming for X Series control panels.
Details on navigating the X Series home screen, adjusting temperature, and accessing settings.
Describes water care modes and schedule modification for X Series spas.
Covers maintenance reminders, lock settings, electrical configuration, and audio setup for X Series.
Step-by-step guide for removing and installing JetPaks in M, A, R, and STIL series spas.
Instructions on how to adjust water flow for JetPaks and spa shell jets.
Information on spa chemicals and the operation of the FROG @ease sanitizing system.
Recommended levels for pH, Total Alkalinity, and Calcium Hardness for optimal spa water.
Guide to diagnosing and resolving common spa operational problems and error messages.
Steps for filling the spa with new water and initial chemical balancing.
Guidance on maintaining sanitizer and pH levels, and general water care practices.
Advice on dealing with cloudy water, foam, and chemical imbalances in spa water.
Steps for draining and refilling the spa, and cleaning after water change.
Instructions for cleaning and replacing filters for M Series and A, R, X, STIL Series spas.
Guidelines for cleaning the spa shell, general surfaces, and removing buildup lines.
Specific care instructions for JetPaks and headrests, including cleaning and protection.
How to vacuum debris and prepare the spa for periods of low or no use.
Procedures for properly winterizing the spa for cold weather and de-winterizing for use.
Steps for removing and installing equipment doors on M Series spas.
Steps for removing and installing equipment doors on STIL Series spas.
Steps for removing and installing equipment doors on A, R, X Series spas.
Steps for removing and installing equipment doors on X6R Series spas.
Guidance on choosing the best location, considering indoor/outdoor environments and humidity.
Factors for outdoor spa placement, including sunlight, codes, and landscaping.
Advice on spa placement, service access, and selecting a suitable foundation for stability.
Table detailing width, length, and height for various Bullfrog Spa models.
Comprehensive guide for electrical setup, wiring, and safety requirements.
Details on connecting 120V/60Hz spas, including cord-connected and permanently-connected types.
Instructions for 240V/60Hz and 230V/50Hz spa electrical connections and conversion options.
Diagrams illustrating electrical conduit routing for various M Series spa models.
Explains warranty service, performance, exclusions, and limitations for M, A, STIL series.
Outlines warranty limitations, disclaimers, and customer legal rights for M, A, STIL series.
Explains warranty service, performance, exclusions, and limitations for R Series.
Outlines warranty limitations, disclaimers, and customer legal rights for R Series.
Explains warranty service, performance, exclusions, and limitations for X Series.
Outlines warranty limitations, disclaimers, and customer legal rights for X Series.
To Next Page
