EasyManua.ls Logo

Bunn BX BREWER - Basic Cleaning Procedures; Cleaning the Sprayhead Tube

Bunn BX BREWER
54 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Wash Brew Funnel and glass Carafe after each use. If
you have a dishwasher, go that route.
Important: separate Lid from Carafe to place in
dishwasher, using top shelf only for both glass and Lid.
If you go the wash-by-hand route, use a mild, non-
abrasive dish soap. Be sure to use edge of sponge or
corner of dish towel to clean every nook and cranny.
Wipe the outside of the brewer occasionally, including
area above the Brew Funnel.
If you’re a neat freak, do it more than occasionally.
BASIC CLEANING
Cleaning the Sprayhead Tube removes deposits due to
natural mineral content in your water. The more mineral
content in your water, the more you should clean.
A good rule of thumb is to do it every 3 months,
unless you have very hard water then twice a month
may be necessary.
You’ll need: metal Deliming Tool provided with your
machine, toothpick, dish soap, soft cloth.
Unplug brewer, and let it cool (up to 2 hours).
Remove funnel and unscrew Sprayhead.
Insert all but 2 inches of the Deliming Tool into
Sprayhead Tube.
Slide Deliming Tool in and out of Sprayhead Tube 5-6
times to loosen any deposits.
CLEANING THE SPRAYHEAD TUBE
18

Related product manuals