Bunn CW-APS - Page 5

Page 5
PLUMBING REQUIREMENTS (cont.)
SECOND TYPE MODELS W/FAUCET
THIRD TYPE MODELS W/FAUCET
Models CWTF-APS, CWTF-TS CWTF-TSR:
1. Flush the water line and securely attach it to the
flare fitting on the strainer or tee.
2. Turn on the water supply.
3. Place an empty vessel beneath the faucet and lift
the handle until water is dispensed.
EARLY MODELS W/OUT FAUCET
1. Flush the water line and securely attach it to the
flare fitting on the strainer.
2. Turn on the water supply.
FIRST TYPE MODELS W/FAUCET
10690 081100