To Next PageTo Next Page
Need help?Do you have a question about the Bunn Crescendo Series and is the answer not in the manual?
General| Beverage Options | Coffee |
|---|---|
| Grinder | No |
| Voltage | 120 V |
| NSF Listed | Yes |
| Material | Stainless Steel |
| Phase | 1 |
Critical safety warnings regarding electrical hazards, hot liquids, and servicing.
Requirements for backflow prevention to comply with plumbing codes.
Instructions for connecting the appliance to the electrical power supply.
Steps for connecting the water supply line to the dispenser.
Procedure for filling and heating the internal water tanks.
Information on factory preset tank temperatures and adjustment recommendations.
Explanation of the automatic liquid level maintenance system.
Description of cup size and dispense buttons, and LED indicators.
Step-by-step guide on how to dispense beverages using the control panel.
Explanation of how to set the unit for single cup size dispensing.
Guide to editing or creating custom beverage recipes.
Steps for modifying the machine and countertop for waste disposal.
Instructions on how to activate the energy saving features.
Guidelines for cleaning the external parts of the dispenser.
Procedures for daily cleaning of removable parts like the drip tray.
Detailed instructions for weekly cleaning of internal components and hoppers.
Steps for removing and cleaning hopper elbows and mixing chamber connections.
Procedure for removing and cleaning mixing chambers and frother disks.
Instructions for removing and cleaning dispense hoses.
Steps for preparing and using a sanitizing solution for parts.
Instructions for cleaning the bore of dispense nozzles with a brush.
Guidance on reassembling parts, aligning components correctly.
Recommended parts and kit for 6-month preventive maintenance.
Recommended parts and kit for 12-month preventive maintenance.
Primary variables for adjusting espresso shots, including particle size and dosage.
Step-by-step procedure for adjusting the coffee grinder settings.
Target brew/pour times for double and single shot espresso.
How to adjust particle size using the adjustment knob.
How to adjust particle size using the adjustment screw with lock nut.
Procedure to reset the grinder adjustment screw to factory settings.
Steps to cool the espresso tank before draining.
Procedure for draining water from the soluble tank.
Procedure for draining water from the espresso tank.
