Page 22
SERVICE (cont.)
36102 090203
15. Reconnect the wires to the limit thermostat and
tank heaters and control thermostat. See
Limit
Thermostat
and
Control Thermostat
sections in
this manual when reconnecting wires.
16. Install fill basin, secure with tank inlet fitting and
gasket. Insert water supply line through grommet
in fill basin.
17. Refer to Fig.13 when reconnecting the tank heater
wires.
TANK HEATERS (cont.)
BLU to Voltage
Selector Switch
RED to Terminal Block
WHI/VIO to Selector Switch
Thermal Fuse W/BLK Lead
to Control Thermostat
FIG. 13 TANK HEATER TERMINALS
P2751
To Next Page
Loading...
