Before Connection to the Power Supply
•
•
by
• Remove any protective coating from the outer panels.
•
appliance.
Water Connection
• Connection to the cold water supply and the appliance is made via the hose supplied.
•
-
porated in this appliance.
Electrical Connection
• -
• Isolation switches for the appliance must not be obstructed and be within easy reaching.
•
boiler in water or any other liquid.
•
Fitting a Plug:
-
Important: The wires in the mains lead are coloured in accordance with the following code:
BLUE wire NEUTRAL - N
BROWN wire LIVE - L
Important:
cord must be used. The supply cord may become warm when the appliance is in use.
safety regulations the means of disconnection must be accessible after installation.
7
www.gdpacatering.com
To Next Page
Loading...
