To Next Page
N
Nicholas BullockSep 12, 2025
What to do if minimum input value has been reached on Bürkert Controller?
- RrodriguezandreaSep 12, 2025
If you've reached the minimum input value on your Bürkert Controller, do not reduce the value further.
What to do if minimum input value has been reached on Bürkert Controller?
If you've reached the minimum input value on your Bürkert Controller, do not reduce the value further.
What to do if signal fault Actual value process controller appears on Bürkert Controller?
Check the signal related to the actual value process controller on your Bürkert Controller.
General| Category | Valve Positioners |
|---|---|
| Supply Voltage | 24 V DC |
| Input Signal | 4…20 mA |
| Feedback Signal | 4…20 mA |
| Protection Class | IP65 |
| Ambient Temperature Range | -20°C to +60°C |
| Housing Material | Aluminum |
| Supply Pressure | 1.4 to 7 bar |
| Communication | PROFIBUS DP, DeviceNet |
