5.
Hitching the Trailercycle to Your Bicycle:
1. Slide lever to retract safety pins.
2. Set hitch on rack as shown.
3. Ensure that lever rotates back to fully engage pins.
4. Push knob down to engage hitch bolt.
5. Fully tighten hitch bolt.
IMPORTANT: KNOB MUST BE TIGHTENED AND SAFETY PINS ENGAGED
BEFORE USE. DO NOT USE YOUR TRAILERCYCLE IF YOU ARE UNABLE TO
SECURELY TIGHTEN KNOB OR GET FULL ENGAGEMENT OF THE SAFETY PINS.
1
2
3
4
5
To Next Page
Loading...
