Burns & Barkles 010382

Questions and Answers

G
Gina EverettAug 6, 2025
What to do if the burners will not light with the lighter system on my Burns & Barkles 010382 Grill?
- C
  Cody ScottAug 6, 2025
  If the burners on your Burns & Barkles Grill won't light, there are several possible reasons. First, the gas cylinder might be empty, in which case you should replace it with a full one. Second, the regulator could be defective, so check it and replace it if necessary. Finally, the burners, hoses, or nozzles might be blocked; try cleaning them to resolve the issue.
K
Kimberly WattsAug 11, 2025
How to fix a gas leak from hose on Burns & Barkles Grill?
- L
  Leslie OliverAug 11, 2025
  If you notice a gas leak from the hose of your Burns & Barkles Grill, immediately turn off the gas at the cylinder. The suggested solution is to replace the damaged hose.
A
Aaron SanchezAug 18, 2025
What to do if I see small flame or flash-back (fire in the burner tube – hissing or rumbling noise) on my Burns & Barkles Grill?
- A
  Andre LoganAug 18, 2025
  If you observe a small flame or flash-back (fire in the burner tube accompanied by hissing or rumbling noises) on your Burns & Barkles Grill, it could be due to a blocked burner, hoses, or nozzles. Try unblocking the burner, hoses, and nozzles. Another possible cause is strong wind; in this case, place the grill in a more sheltered location.
A
Alyssa CobbAug 25, 2025
Why is it difficult to turn the gas knob on my Burns & Barkles Grill?
- V
  Veronica LeeAug 25, 2025
  If you're finding it difficult to turn the gas knob on your Burns & Barkles Grill, the gas valve may be jammed. The suggested solution is to replace the gas valve.
F
Frederick WhiteAug 30, 2025
What to do if there is a gas leak from gas cylinder valve of Burns & Barkles Grill?
- O
  Olivia WestAug 30, 2025
  If there's a gas leak from the gas cylinder valve on your Burns & Barkles Grill, immediately close the gas cylinder valve. Then, return the gas cylinder to the gas supplier.