BURREL EDGE HD+3G - PIR and Timer Settings

PIR Settings
● PIR settings are presented in the second row with clock icon. Here you can change
all the settings related to PIR and Timer.
Setting Description
Sensitivity
O (time lapse only, not triggered)
Low (temperature below -12°C)
Normal (temperature -12°C – +27°C)
High (temperature > +27°C)
Trigger Interval
Time between when a photo is sent and the next photo can be trig-
gered. 1 min trigger interval is recommended!
Time Lapse
The camera will take pictures at specied intervals. Camera will also
use PIR unless the Sensitivity is turned O.
Start-Stop 1/2
The camera can be set to operate only during specic time periods.
Select ON, then press OK to access the submenu. It is possible to
use 2 dierent timers. Make sure the times do not overlap.
Work Day
The camera can be set to operate only on selectet working days us-
ing the week calendar. Press OK in order to move to the submenu.
Go through the week day using Up or Down button. Change the
value pressing Left or Right button.
SETTINGS MENU
EN
11