BURREL EDGE HD+3G - Camera Settings Menu; Camera Settings Configuration

SETTINGS MENU
Camera comes with default settings that are suitable for most of the users. You can still change the
settings from camera settings menu, such as image resolution or PIR sensitivity.
Turn camera switch to SETUP. When camera is powered ON, press MENU-button. Move between
dierent settings by pressing arrow buttons “UP” or “DOWN”. Change the setting by pressing “LEFT”
or “RIGHT” and conrm by pressing OK. You can access to submenus by pressing OK. There you
can change the settings with arrow buttons and confrim by pressing OK. Get back to start screen
by pressing Menu.
Camera Settings
● Camera settings are presented in the rst row with camera icon. Here you can
change all the settings related to images and videos.
Setting Description
Mode Photo, Video or Photo + Video.
Photo Size 3MP, 5MP, 8MP or 12MP.
Photo Burst
Set the number of images taken for each trigger (1-3). The camera
will transmit the rst photo.
Video Size Choose video size QVGA, WVGA, 720p or 1080p.
Video Length Choose length of the video clip 1-30s.
Sound Turn Video sound On or O.
EN
10