BURREL EDGE HD+3G - Installation Part 2 B: Burrel Online Tool Wireless Setup

INSTALLATION (PART 2B)
Go to Burrel Online Tool
Testing the sending function
Go to burrelhunting.com/setup
Turn camera switch to SETUP. Wait until the camera shows
signal strength and operator name. Press OK and camera
captures picture manually. Conrm manual sending and
camera will send the picture. If an error occurs during the
sending, please go through the wireless settings again.
1.
3.
Wireless setup with Burrel Online Tool (alternative for Sensegram)
Making the settings
Online tool will guide you through the settings step by step.
Finally download the setup le and transfer it to the camera’s
SD card using USB cable or SD card reader. After this, turn
camera switch to SETUP and press Menu to get to settings. Go
to Wireless -> Update Para.
2.
NOTICE!
Using Burrel online setup tool requires email account for sending pictures.
Check the email settings (server, port) from your email provider!
EN
8