To Next Page
Y
ybakerAug 13, 2025
Why does my BUSCH Air Compressor not reach the usual pressure?
- LLindsay CoxAug 13, 2025
Your BUSCH Air Compressor might not be reaching its usual pressure due to several reasons. It could be a leak in the pressure system, a misadjusted or defective pressure relief valve, or a clogged screen in the gas inlet. There might be clogging in the suction, discharge, or pressure line, or the lines may be too small in diameter. The inlet non-return valve could be stuck, or internal parts may be worn or damaged. To troubleshoot, check for leaks, adjust or replace the valve, clean the screen, remove any clogging, use a larger diameter line, or have the compressor repaired if internal parts are damaged.
General