OPERATION
DHM7 05/21 Operation Section 4-2
© 2021 Alamo Group Inc.
OPERATION
DHM 7 DISC MOWER
OPERATION INSTRUCTIONS
Bush Hog’s latest edition of Hay Mower includes DHM7 Model with a mowing width of 7’ to meet the hay
production requirement of today’s farmers and ranchers. The mower is equipped with protective deflectors
and/or chain guards to prevent objects being thrown from the mower by the blades, however, no shielding is
100% effective. All shields, guards, deflectors, and chains equipped on the unit must be maintained on the
mower in good operational condition.
It is the operator’s responsibility to be knowledgeable of all potential operating hazards and to take every
reasonable precaution to ensure oneself, others, animals, and property are not injured or damaged by the
mower, tractor, or a thrown object. Do not operate the mower if passersby, pets, livestock, or property are
directly in front or to the rear of the unit.
This section is designed to familiarize, instruct, and educate safe and proper mower use to the operator.
Pictures in this section are for the purpose of explaining the operation of a rotary mower and are not
necessarily of an DM cutter. Some pictures may show shields removed for purposes of clarity. NEVER
OPERATE this implement without all shields in place and in good operational condition. The operator must be
familiar with mower and tractor operation and all associated safety practices before operating the mower and
tractor. Proper operation of the DM mower, as detailed in this manual, will help ensure years of safe and
satisfactory use of the mower.
IMPORTANT: To avoid mower damage, retorque all bolts after the first 10 hours of operation. Retighten blade
carrier retaining nut on gearbox lower shaft to 300 ft. lbs.
READ AND UNDERSTAND THE ENTIRE OPERATING INSTRUCTIONS AND SAFETY SECTION OF THIS
MANUAL AND THE TRACTOR MANUAL BEFORE ATTEMPTING TO USE THE TRACTOR AND
IMPLEMENT. If you do not understand any of the instructions, contact your nearest authorized dealer for a
full explanation. Pay close attention to all safety signs and safety messages contained in this manual and
those affixed to the implement and tractor. OPS-U- 0001
READ, UNDERSTAND, and FOLLOW
the following Safety Messages. Death or serious
injury may occur unless care is taken to follow the warnings and instructions stated in the
Safety Messages. Always use good common sense to avoid hazards.
(SG-2)
Si no lee ingles, pida ayuda a alguien que si lo lea para que le traduzca las
medidas de seguridad. (SG-3)
To Next Page
Loading...
