Bush Hog Front-Push Loaders 2426QT User Manual
















SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE Page 75
 Specifications Based on 1997 ASAE STANDARDS 
 35 - 75
 2WD only
 - Measured at Pivot Pin 117 inches
 - Under Level Bucket 108 inches
 50°
 4.5 inches
 to Maximum Height - At Pivot Pin 2990 lbs
 to Maximum Height - 31.5 inches Forward of Pivot Pin 1920 lbs
 to 59 inch Height - At Pivot Pin 4130 lbs
 to 59 inch Height - 31.5 inches Forward of Pivot Pin 3020 lbs
 - At Pivot Pin 4985 lbs
 - 31.5 inches - Forward of Pivot Pin 3500 lbs
 at Maximum Height - 31.5 inches Forward of Pivot Pin 2400 lbs
 at 59 inch Height - 31.5 inches Forward of Pivot Pin 3340 lbs
 at Ground Level - 31.5 inches Forward of Pivot Pin 2710 lbs
 (Ground Level to Full Height) 6 seconds
(Full Height to Ground Level) 3 seconds
(Full Rollback to Full Dump) 3.5 seconds
(Full Dump to Full Rollback) 2 seconds
 Two 2.0 inch Bore, 23.19 inch Stroke Double Acting Bucket Cylinders and Two 2.25 inch Bore, 29.62 inch Stroke Double Acting Lift Cylinders
 2450 PSI hyd. Pressure & 11 GPM pump capacity
 Available in 60, 72 and 80 inch widths
 Available in 60, 72 and 84 inch widths
 Forklift Attachment (42 inch tines), Round Bale Spear, Grapple Fork, Bucket Tine Teeth,
Bolt-On Digging Teeth, Side Cutting Edges, Spill Guard Attachment, Hydraulic Self-Leveling, and Grill Guards
 1 year limited warranty
 Available in major tractor colors

Bush Hog Front-Push Loaders 2426QT Specifications

General

Loader Type	Front-Push Loader
Model	2426QT
Bucket Width	72 inches
Dump Angle	45 degrees
Rollback Angle	30 degrees
Horsepower Requirement	30-60 HP

Summary

Bush Hog Tough Features

Tough Boxed Boom Design

Highlights the robust construction of the boom.

Tough Large Diameter Cross Tubes

Emphasizes the durability provided by larger cross tubes.

Tough Robotic Welds

Notes the strength and precision of robotic welding.

Tough High Strength Chrome Plated Cylinder Rods

Details the durability of chrome-plated cylinder rods.

Tough Powder Coat Paint

Mentions the protective and durable powder coat finish.

Model Specifications

Tractor PTO HP Range

Specifies the recommended tractor horsepower range.

2WD/FWA

Indicates the drive type compatibility.

Maximum Lift Height - Measured at Pivot Pin

Details the maximum lift height from the pivot pin.

Maximum Lift Height - Under Level Bucket

Specifies maximum lift height with a level bucket.

Maximum Dump Angle

States the maximum angle for dumping material.

Digging Depth

Indicates the maximum depth the loader can dig.

Lift Capacity to Maximum Height - At Pivot Pin

Load capacity at max height measured at pivot pin.

Lift Capacity to Maximum Height - 31.5 inches Forward of Pivot Pin

Load capacity at max height 31.5 inches forward of pivot.

Lift Capacity to 59 inch Height - At Pivot Pin

Load capacity at 59 inch height measured at pivot pin.

Lift Capacity to 59 inch Height - 31.5 inches Forward of Pivot Pin

Load capacity at 59 inch height 31.5 inches forward of pivot.

Breakout Force - At Pivot Pin

Force exerted at the pivot pin to break out material.

Breakout Force - 31.5 inches - Forward of Pivot Pin

Force exerted 31.5 inches forward to break out material.

Rollback Force at Maximum Height - 31.5 inches Forward of Pivot Pin

Force to resist rollback at max height, 31.5 inches forward.

Rollback Force at 59 inch Height - 31.5 inches Forward of Pivot Pin

Force to resist rollback at 59 inch height, 31.5 inches forward.

Rollback Force at Ground Level - 31.5 inches Forward of Pivot Pin

Force to resist rollback at ground level, 31.5 inches forward.

Raising Time

Time taken to raise from ground to full height.

Lowering Time

Time taken to lower from full height to ground level.

Bucket Dumping Time

Time taken for bucket to dump from full rollback.

Bucket Rollback Time

Time taken for bucket to rollback from full dump.

Hydraulics

Details on cylinder bore/stroke and pump capacity.

Features and Options

Bush Hog Quick Attach Buckets

Available bucket widths for the quick attach system.

Bush Hog Quick Attach Heavy Duty Buckets

Available heavy duty bucket widths.

Options

List of available attachments and features.

Warranty

Information on the product's warranty period.