SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE Page 78
Specifications Based on 1997 ASAE STANDARDS
70 - 120
2WD only
- Measured at Pivot Pin 143 inches
- Under Level Bucket 134 inches
50°
4.5 inches
to Maximum Height - At Pivot Pin 4110 lbs
to Maximum Height - 31.5 inches
Forward of Pivot Pin 2800 lbs
to 59 inch Height - At Pivot Pin 4410 lbs
to 59 inch
Height - 31.5 inches Forward of Pivot Pin 3360 lbs
- At Pivot Pin 5160 lbs
- 31.5 inches
- Forward of Pivot Pin 3730 lbs
at Maximum Height - 31.5 inches Forward of Pivot Pin 4940 lbs
at 59 inch Height - 31.5 inches Forward of Pivot Pin 6865 lbs
at Ground Level - 31.5 inches Forward of Pivot Pin 5305 lbs
(Ground Level to Full Height) 5 seconds
(Full Height to Ground Level) 3 seconds
(Full Rollback to Full Dump) 5 seconds
(Full Dump to Full Rollback) 3 seconds
Two 2.5 inch Bore, 28.75 inch Stroke Double Acting Bucket Cylinders and Two 2.5 inch Bore, 31.5 inch Stroke Double Acting Lift Cylinders
2450 PSI hyd. pressure & 16 GPM pump capacity
Available in 60, 72 and 84 inch widths
Available in 84 inch widths
Forklift (48 inch tines) Attachment, Round Bale Spear, Grapple Fork, Bucket Tine Teeth,
Bolt-On Digging Teeth, Side Cutting Edges, Spill Guard Attachment, Hydraulic Self-Leveling, and Grill Guards
1 year limited warranty
Available in major tractor colors
Need help?
General
