What to do if my Bush LCD TV has no picture and sound?
If your Bush LCD TV shows no picture and no sound, first ensure that the TV is properly connected to a functioning power source. Then, check if electricity is available at the outlet. Finally, verify that the correct signals are being input into the TV.
What to do if my Bush LCD TV screen is blank?
If your Bush LCD TV screen is blank, try using the remote to change the signal input to the correct one. If that doesn't work, and the power supply has been interrupted, try restarting the television.
What to do if there is no sound on my Bush LCD TV?
If there is no sound on your Bush LCD TV, first try pressing the VOL+ button to increase the volume. If that doesn't work, switch to another channel to see if the problem persists.
Key safety advice and warnings to read before use.
Comprehensive safety precautions for product operation and maintenance.
Instructions on how to connect the TV to the power supply.
Guidance on replacing the power plug and safety warnings.
Identification and function of the TV's control panel buttons.
Identification of various input/output connection ports on the TV.
Detailed explanation of remote control buttons and their functions.
Placing TV, connecting aerial, batteries, and selecting language.
Procedure to power on the TV and perform initial language selection.
Steps for automatic and manual channel searching.
Guidance on selecting input sources like TV, PC, or HDMI.
How to select TV programs and adjust volume levels.
Accessing and navigating the channel list menu.
Adjusting contrast, brightness, colour, sharpness, tint, and mode.
Adjusting warm/neutral/cool colour tones for personal preference.
Reducing image noise for better picture quality.
Restoring picture settings to default values.
Adjusting sound balance, mode, AVL, SRS TS XT, and audio output.
Customizing sound frequencies for personal audio preference.
Selecting primary or secondary audio languages for DTV.
Adjusting left/right speaker output for stereo reproduction.
Selecting menu language and subtitle languages.
Adjusting picture aspect ratio (4:3, 16:9, Zoom, Wide).
Enabling blue background and using the DTV program recorder.
Setting the duration for on-screen menu visibility.
Setting the TV's internal clock and date.
Configuring auto turn-off and sleep timer functions.
Setting the correct time zone for accurate time display.
Changing password and enabling/disabling child lock features.
Controlling access to tuning menus and external input sources.
Setting limits for channel numbers and maximum volume.
Displaying and selecting subtitle languages for DTV.
Accessing and navigating the channel list.
Introduction to Teletext and its use for information and subtitles.
Using buttons like Setup, Page Up/Down, Page Number, Mix mode.
Using Index, Language change, Hold, Size, Reveal, Time.
Supported file formats and equipment for USB playback.
Steps for safely connecting and disconnecting USB storage.
Preparing the USB disk and selecting the recording function.
Diagnosing and resolving issues with no picture or sound.
Troubleshooting steps for blank screens and lack of audio.
Resolving problems related to poor sound quality or single-channel picture.
Addressing problems with color display and picture spots.
Details on screen type, viewable angle, and colour system.
Information on sound system, video input, power, and dimensions.
Details of the 12-month product guarantee and its provisions.
To Next Page
General
