This document is an instruction manual for the Bush b-3363G Home Theatre soundbar system. It provides guidance on setup, usage, technical specifications, and product support.
Function Description
The Bush b-3363G Home Theatre is a soundbar system designed to enhance audio output for televisions, MP3 players, smartphones, and other audio equipment. It includes a soundbar and an external wired subwoofer to deliver a more immersive audio experience. The system supports multiple input sources, including stereo RCA, optical, and 3.5mm line-in, as well as Bluetooth connectivity for wireless audio streaming. It features a remote control for convenient operation and offers various sound modes optimized for movies, music, and dialogue. The soundbar can be wall-mounted for flexible placement.
Important Technical Specifications
Amplifier:
- Power output: 100W RMS
- Frequency response: 20Hz - 20KHz ± 3dB
- Input sensitivity: 1000mV
Main unit (Soundbar):
- Power supply: INPUT: 100-240V ~ 50-60Hz, OUTPUT: 24V 2.5 A
- Power consumption: 60W
- Standby power consumption: < 0.5W
- Full range speaker drivers: Impedance: 4 Ohm, 52mm (2"); Frequency response: 180 Hz ~ 20KHz
- Dimensions: 940 x 68 x 60mm
Subwoofer:
- Impedance: 4 Ohm, 120mm (4.75")
- Frequency response: 35~180Hz
- Dimensions: 172 x 352 x 320mm
General:
- Mains cable length: 1 metre
- Remote control battery: 1 x CR2032
- Bluetooth compatibility: EDR, GFSK, π/4-DQPSK, 8DPSK
- Bluetooth version: 2.1
- Bluetooth operation range: Approximately 10 meters (30 Feet)
Usage Features
Getting Started:
- The manual emphasizes a simple, step-by-step setup process.
- Accessories included: Soundbar, external subwoofer, remote control, CR2032 battery, RCA audio cable, digital optical audio cable, 3.5mm audio cable, mains adapter, and instruction manual.
Control Panel and Remote Control:
- Soundbar Controls:
- Stereo RCA Audio inputs (L/R AUX IN)
- OPTICAL IN
- DC Power input
- Subwoofer Output (SUB OUT)
- Power and Source button: Press and hold 2 seconds for ON/OFF; single touch to select input (BT, Aux in, Line in, Optical in).
- Volume + and - buttons.
- Pair button: Initiates Bluetooth pairing.
- 3.5mm LINE input.
- Remote Control Functions:
- Power: ON/OFF.
- Mute.
- Skip (forward/back) in Bluetooth mode.
- Play/Pause in Bluetooth mode.
- Pair: Activates Bluetooth pairing mode.
- Volume +/-.
- Source: Selects input (Optical, Line In, AUX in, Bluetooth).
- Voice: EQ optimized for dialogue.
- Movie: EQ optimized for movie sound.
- Music: EQ optimized for music.
- Bass +/-: Adjusts bass levels.
Connecting the System:
- Wired Subwoofer: Connects to the soundbar via an RCA audio cable to the SUB OUT port. The soundbar automatically uses the connected subwoofer when audio is played.
- Stereo RCA Inputs (AUX IN): Connects to audio outputs of a TV or other devices using the supplied RCA cable.
- Optical Input: Connects to a TV or audio source with an optical audio output using the supplied digital optical audio cable. Requires setting the audio source to PCM or Optical Audio.
- Line In (3.5mm): Connects to MP3 players, smartphones, or other audio sources using the supplied 3.5mm audio cable. Disconnects other cables when in use.
- Bluetooth Pairing:
- Switch on the unit.
- Select Bluetooth mode via the SOURCE button (blue light indicator).
- Press the PAIR button on the remote or unit (flashing blue light).
- Select "b-3363G" on your Bluetooth device to pair.
- A beep confirms successful pairing, and the indicator turns solid blue.
- The unit remains paired unless manually unpaired or reset.
- Controlling a Paired Bluetooth Device: Playback, skip tracks, and pause can be controlled via the remote or the audio device itself. Volume output is affected by the source device's volume level (recommended 70-80%).
Source Indicator Lights:
- Red Light: Power Off
- Orange Light: Optical Mode
- White Light: Aux In Mode
- Green Light: Line In Mode
- Flashing Blue Light: Bluetooth Pairing
- Blue Light: Bluetooth Connected
Wall Mounting:
- Includes wall fixing screws and wall mount brackets.
- Requires careful installation by a qualified person to avoid damage and ensure structural integrity.
- Important to check for hidden wires/pipes before drilling.
Maintenance Features
Care & Maintenance:
- After Use: Set the soundbar to Standby. Unplug from mains if leaving unattended for long periods (e.g., holidays).
- Battery Care: Remove the remote control battery if the unit is left unattended for long periods to prevent leakage and damage.
- Cleaning: Unplug the unit from mains power before cleaning. Wipe the cabinet with a lint-free duster. Do not use liquids or solvents.
Troubleshooting:
- No Power: Check mains plug connection and power to the socket.
- No Sound:
- Ensure external source volume is up and outputting sound (for AUX input).
- Check soundbar volume.
- For digital optical input, ensure source DIGITAL output is set to PCM, LPCM, PCM 2Ch stereo, or PCM downmix.
- For Bluetooth, verify device is paired.
- No Response from Soundbar: Unplug power cable for 1 minute, then plug back in.
- Remote Control Not Working:
- Reduce distance to the main unit.
- Check battery installation.
- Replace battery (CR2032 lithium).
- Aim remote directly at the soundbar.
- Unit Powers Off After 20 Minutes: This is a power-saving feature (STANDBY mode after 20 minutes of inactivity). Press the STANDBY button to wake the unit.
- Double insulated, no earth connection required.
- Connect to 100-240V 50/60Hz AC supply.
- Unplug during lightning storms or long periods of disuse.
- Avoid opening covers to prevent exposure to dangerous voltages.
- Prevent fire/electric shock by avoiding overloaded outlets/extension cords.
- Use suitable power sources as marked.
- Ensure supply voltage matches technical specifications.
- If plug is unsuitable, consult a qualified electrician.
- Completely disconnect from mains by switching off outlet and removing plug.
- Do not bend, stretch, or pull supply cable.
- Power socket must be easily accessible.
- Allow adequate ventilation; do not install in confined spaces.
- For indoor use only.
- Heat Build-up: Unit may heat up during continuous high-volume use; avoid touching to prevent burns.
- Colour Irregularity on TV Screen: If seen, turn TV off for 15-30 minutes, then on again. If still present, move soundbar further from TV.
- Moisture and Water: Do not use near water, bathtubs, sinks, wet basements, or swimming pools.
- Heat Sources and Flames: Batteries should not be exposed to excessive heat. Avoid overloading outlets.
- Servicing and Repairs: Refer all servicing to qualified personnel. Servicing is required if the apparatus is damaged (liquid spills, objects fallen in, rain exposure, abnormal operation, dropped).
Disposal:
- Product is designed with high-quality, recyclable materials.
- Indicates compliance with European Directive 2002/96/EC (crossed-out wheeled bin symbol).
- Dispose of old products according to local regulations, not normal household waste, to prevent negative environmental and health consequences.
- Argos Ltd. declares compliance with essential requirements of Directive RED 2014/53/EC.
- The complete declaration is available at www.argos-support.co.uk.
- Bluetooth® word mark and logos are registered trademarks of Bluetooth SIG, Inc.
- CE marking indicates compliance with essential requirements for Radio Equipment and Telecommunications Terminal Equipment Directive RED 2014/53/EC for use within the UK.
Product Support:
- Online support: www.argos-support.co.uk
- Helpline: 0345 604 0105 (8am-7pm Mon-Sat, 10am-4pm Sun).
- Requires model reference (b-3363G), serial number, and date of purchase for assistance.
- Provides a 12-month guarantee against faults and breakdowns, subject to conditions (e.g., correct installation, domestic use, no accidental damage, no inexpert repair).
- Includes important data protection information regarding personal data processing.
Need help?
General
To Next Page