12
Installing your
Cooker Hood
Bringing it all together
Installation requirements
Unpacking
Carefully unpack and examine the appliance for
any damage. If you think there is a defect, do not
use the appliance and contact Product Support
on 01759 487838.
Packaging materials should be collected
together and disposed of immediately as they
may be
harmful to children.
If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,
Hood
Tools Required for Installation
Electric Drill
Cross-end Screwdriver
PLEASE NOTE: The cooker hood must be installed at a minimun of 65cm above the hob
THIS COOKER HOOD MUST BE
INSTALLED BY A COMPETENT PERSON TO
LOCAL REGULATIONS
To Next Page
Loading...
